Use and care

In four steps

1. Fill one of the two bottles with clean water.
2. Press Wurvl firmly into the opening of that bottle.
3. Place the second, empty bottle upside down on Wurvl. Press that one on firmly too.
4. Turn the whole thing over. The water swirls in a vortex through the copper core into the bottom bottle.

Is the top bottle empty? Then turn it all over again if you want to see it once more.

Want to know why the water starts to swirl? Read How a vortex forms between two bottles.

Tips

• Use two identical bottles. Then both sides of Wurvl fit equally well. The bottle guide shows which bottles fit.
• Press Wurvl in firmly. That way it stays in place when you turn everything over.
• Is the vortex not starting by itself? Then make a few small circular movements with the top bottle. The water often starts to swirl after that.

Cleaning and drying

Rinse Wurvl with warm water after use. Then dry the copper core with a Wurvl Dry Swab, the drying stick from the box.

Let everything dry well before you put it away. Lay Wurvl down so that both openings are clear.

Do not use harsh cleaning products, such as bleach, descaler or abrasive cleaners. You will find more tips in How to keep your Wurvl dry and clean.

What not to put through Wurvl

Wurvl is meant for clean water. Do not use acidic liquids, such as juice, lemon water or vinegar. And no carbonated drinks, such as sparkling water or soft drinks.

Storage

Only put Wurvl away when everything is completely dry. That way you do not trap any moisture. This also applies if you keep it in a cotton pouch.

Keep it where small children cannot reach it.

Take care with the Mag Lite

The Mag Lite has a neodymium ring magnet. That is a strong magnet. So please keep the following in mind:

• Keep the magnet away from pacemakers and other medical implants.
• Keep it away from bank cards and key cards.
• Keep it out of the reach of small children.

Still have a question?

Take a look at the frequently asked questions, or email me at info@wurvl.store.